WALNUT GUNSTOCK MAINTENANCE | CLEANING. CONFIRM YOUR SHOTGUN IS UNLOADED PRIOR TO PROCEED.  GOOD?  CHECK AGAIN. 1. INITIAL DRY CLEAN. 2. CLEANING. Tip: Wrap the cloth around your finger to get into curves or checkered areas. 3. DRY IT IMMEDIATELY. AL

WALNUT GUNSTOCK MAINTENANCE | CLEANINGCONFIRM YOUR SHOTGUN IS UNLOADED PRIOR TO PROCEED. &#xA0;GOOD? &#xA0;CHECK AGAIN.1. INITIAL DRY CLEAN&#xA0;<ul style="margin-left: 0.25in;"><li>Use a soft brush (like a paintbrush or toothbrush) to get into checkering or tight spots.</li><li>Wipe down with a microfiber or lint-free cloth to remove dust and dirt.</li></ul>&#xA0;2. CLEANING<ul style="margin-left: 0.25in;"><li>Dampen a cloth with lukewarm water and a drop of mild dish soap.</li><li>Wring it out thoroughly so it&#x2019;s just damp&#x2014;not wet.</li><li>Wipe carefully along the grain.</li><li>Avoid getting moisture into the action or pores of the wood.</li></ul>Tip: Wrap the cloth around your finger to get into curves or checkered areas.&#xA0;3. DRY IT IMMEDIATELY<ul style="margin-left: 0.25in;"><li>Use a dry, clean cloth to remove any moisture.</li><li>Let the rifle sit at room temperature for a bit to fully air dry&#x2014;don&#x2019;t use heat or direct sunlight.</li></ul>ALWAYS AVOID<ul style="margin-left: 0.25in;"><li>Never use harsh chemicals or cleaners, undiluted detergents</li><li>Never soak the wood in water or other liquids.</li><li>Never use abrasive sponges or scrubbers for cleaning</li></ul>

How do I care for my WOOX wood products?

Information about our axes and how to take care of them.

Axes

Information about our knives and how to take care of them.

Knives

Information about our bolt action stocks, technical & compatibility questions, installation guides and maintenance tips.

Bolt Action Stocks

Information about our shotgun furniture, technical & compatibility questions, installation guides and maintenance tips.

Shotgun Furniture

Lever Action

Leave your enquiry and we'll get back to you shortly.

WOOX Knowledge Base

Information about our product, how to take care of them, technical & compatibility questions.

Products

How long does it take to personalize / engrave an item?

What are your shipping rates?

What is my shipment processing time?

When can I expect my order to be shipped or delivered?

My order has been marked as delivered, but I haven't received it.

The tracking service for my shipment is not working properly, what can I do?

How can I track my order?

Can products be shipped to an address different from the billing address?

Do you ship internationally?

The promotional code entered has not been recognized, why is this?

Can I add items to an order after it has been placed?

Can I cancel my order after it has been placed?

Do you offer a Military Discount?

Can I cancel my order if it has not shipped and I found it in stock elsewhere?

What should I do if I haven't received an update on my order?

How long does it take to receive a refund?

How do I sign up as a dealer for WOOX products?

Can I make changes to my order after it has been placed?

What does this item cost?

Can I customize my stock?

Ordering & Shipping

How can I clean my axe?

How can I sharpen my axe?

How to replace the handle on your FORTE axe

Is it possible to add engravings to WOOX axes?

How can I clean my knife?

Are you compatible with 22LR Rem 66?

Are WOOX stocks compatible with Sako 85?

Can I swap Furniture between different chassis?

What barrel diameters are compatible with WOOX stocks?

Can you customize the Furiosa Ultra for other manufacturer models?

Do you offer left hand versions?

What is a Bottom Metal?

What type of screwdriver is needed to remove the butt pad?

Are WOOX rifle stocks compatible with "mini" actions?

Which type of action do I have?

Do WOOX stocks require any bedding?

Are WOOX stocks compatible with Kidd Single Stage Trigger?

Why does my Furiosa push button not detach?

Are the WOOX Bag Riders compatible with the Exactus?

Are your Bottom Metals compatible with AR Style Magazines?

What rifle platforms do your stocks fit?

Do you produce custom stocks or can you modify existing stock models?

Are WOOX Stocks compatible with the Ruger carbine?

Will WOOX Stocks accommodate a Proof Lite Sendero Barrel?

Are WOOX Stocks compatible with 22LR Remington 66?

Are WOOX Stocks compatible with Browning X-Bolt Max SPR?

Do you offer stocks for left-handed bolt actions?

Does the stock come with a bottom metal and magazine?

Do you have stocks that support a large barrel diameter?

How can I ensure the correct fit for aftermarket chassis or stocks?

General Questions

What's the difference between BDL and DBM?

Where can I buy a BDL Hinged bottom plate that work with my WOOX stock??

Where can I buy a DBM Bottom Metal that work with my WOOX stock?

What bottom metal do I need for my Remington 700 DBM?

Is the Furiousa Ultra stock adjustable to fit a Defiance XM length action?

Are your stocks compatible with Seekins Havak PH2?

Are WOOX Stocks compatible with Remington 721?

Are WOOX Stocks compatible with Christensen Arms Bolt Actions?

Are WOOX Stocks compatible with Kelbly Atlas Tactical?

Will WOOX stocks for the 700 clones work with the Impact 737R ?

Will your stocks accomodate a defiance classic Action Remage style 16" with a 1.298  x 1.254 barrel nut?

Are your stocks compatible with seekins havak ph2?

Are WOOX Stock compatible with custom length Defiance Actions?

Are WOOX stocks compatible with Terminus Zeus Actions?

Are your stocks compatible with Rem721?

Are WOOX Stocks compatible with Vudoo Gun Works V22S Single Shot Barreled Action Right Bolt?

Remington 700

Are WOOX stocks compatible with Bergara B14?

Do WOOX stocks accommodate the Bergara B14 Ridge Wilderness?

Will your chassis fit my bergara B-14 Ridge in .300 Win Mag?

Will your stocks fit the Bergara B14 Trainer?

Are WOOX Stocks compatible with Bergara B-14 HMR Bolt-Action Rifle, in 6.5 Creedmoor?

Are WOOX Stocks compatible with Bergara B-14 Stoke?

What do I need to know about using Bergara B14 .22 caliber rifles with Woox stocks for Remington 700 clones?

Bergara B-14

Are WOOX Stocks compatible with the Ruger 10-22 Takedown?

Does your Ruger 10/22 stock fit Volquartsen Summit 22 barreled action?

What is the torque spec for the 10/22 Furiosa takedown screw?

Will your Stocks be compatible with the Kidd 10/22? Will the extended lever mag release and bolt release work?

Will Kidd innovations barrels will work on your stocks?

Do your stocks accommodate the .920 barrel for the ruger 10/22

Are your stocks compatible with Ruger 10/22 semi-action?

Ruger 10/22

What bottom metal do I need for my Ruger American WOOX Stock?

What magazines are compatible with WOOX Ruger American Bottom Metal?

Are WOOX Stocks compatible with Ruger American Gen 2?

Are your stocks compatible with gen 1 ruger american ranch in 300 blk with ar mag feeding?

Are your stocks compatible with Ruger American Rimfire?

Do you make Stocks for the Ruger American Ranch Series?

Are WOOX stocks compatible with Gunsite 308 Ruger scout rifle.

Do you make a stock that fits Ruger 8323 American Rimfire Compact 22 Mag 9+1 18" Black Satin Blued?

Do WOOX Stocks fit Ruger 5.56 NATO ?

Ruger American

Do you make Stocks for Savage 110 long action top bolt release with aics style magazine?

Are WOOX Stocks compatible with Savage 110 Trail Hunter 7mm PRC?

Are your stocks compatible with Savage Model 10?

Do your stocks fit on a Savage 112 338 lapua and a Savage 110 300 prc?

Are WOOX Stocks comatible with Savage 110 hinged floorplate?

Do WOOX Stocks fit savage apex hunter 270wsm?

Are WOOX stocks compatible with  Savage 110 Apex Hunter long action that has the bottom bolt release and the axis-style magazine with the plastic magazine release on the magazine itself?

Will WOOX stocks fit savage model 12 fv top bolt realease?

Are your stocks compatible with Savage Anschutz 64 Match?

Savage 110 Short Action Compatibility

Savage 110

What magazines are compatible with WOOX Tikka T3/T3x?

Are your stocks compatible with Tikka T1X?

Do you offer any stocks compatible with the Tikka T3x?

Will WOOX Stocks  fit a Tikka stainless steel varmint in 300 win mag?

Will your stocks fit  a Tikka T3X Tac A1?

Are WOOX Stocks compatible with the Tikka T3/T3x Factory bottom metal?

Are your stocks compatible with Tikka T3 X Ltd?

Are your Stock compatible with Tikka M76?

Tikka T3/T3x

What bottom metal will accept AICS magazines for Howa1500 LA?

Do you have a chassis that will work with a Howa 300 prc action and bottom metal?

Do I need to purchase a bottom metal for my Howa 1500?

Are WOOX Products compatible with Howa Mini Actions?

Howa 1500

Will WOOX Stocks be compatible with Weatherby Canguard S2 long action with an internal mag with swing clip?

Weatherby Vanguard

Are WOOX Stocks compatible with Sauer 101 model?

Are WOOX Stocks compatible with interarms mark x inlet?

I have a Sauer 100 and I’m wondering what kind of modifications or what type of bottom metal I would need to run my stock magazine or aics magazines?

Sauer 100

What size Hawkins M5 Bottom metal do I need for my Rem700 DBM?

What are your gunstock accessory torque specs?

What should I do if the bottom metal ordered does not fit my chassis?

Accessories

What is the Gladitore compatible with?

Does the Gladiatore Fore End work with a heat shield?

What type of screwdriver is needed to remove the Gladiatore butt pad?

Where is my Gladiatore Adaptor?

Is the Gladiatore Cheek Riser adjustable?

Where can I find the dealer login link?

Are the products sold as 'seconds' by your distributors?

How can I update my address for an existing order?

How do I figure out the size of the action tube of my Mossberg pump shotgun?

What size Gladiatore Forend action tube for the Mossberg Shockwave?

What Size Gladiatore Forend Action Tube for the Mossberg 590A1?

What gauge does the Mossberg Gladiatore Forend fit?

Is the Gladiatore compatible with the Mossberg Bantam?

What is the Action tube size for Mossberg 88?

Is the Gladiatore compatible with the Mossberg 590 Tactical?

Are Hawkins M5 DBM bottom metals compatible with Accuracy International AW 10rd staggered magazines?

Can I add a strap to the forend of the Woox hand and forend for the Shockwave 590s?