Our handguards are designed specifically for the AR-15 platforms and are not compatible with AR-10 models. For AR-10 platforms, we offer alternative solutions like sets that include M-LOK rails which match the aesthetics and functionality but ensure
Our Vigilante Stock is primarily designed to fit standard mil-spec configurations. For specific models or proprietary designs that deviate from the mil-spec format, we recommend checking the specifications directly with the manufacturer or consulting
Yes, the 14.5" handguard will fit on a 16" barrel, leaving approximately 1.5 inches of the barrel exposed.
The Vigilante stock and grip are compatible with both AR-15 and AR-10 platforms that use mil-spec components. However, the Vigilante handguard is designed exclusively for the AR-15 platform and will not fit on an AR-10.
The Vigilante handguard is designed to work with low-profile gas blocks (0.750" diameter or smaller). It is not compatible with A2-style front sights, piston systems, or straight/tall gas blocks without modifications that would void the warranty.
No, the Vigilante stock is designed only for mil-spec buffer tubes. You would need to replace a commercial tube with a mil-spec version for it to fit.
Partially, the WOOX Vigilante handguard is not compatible with AR-10 platforms, including .308 and other AR-10 builds. It is specifically engineered for AR-15 pattern rifles and pistols. The Vigilante buttstock, grip, and M-LOK rail covers are compat
Yes. The Vigilante Stock, Grip, and Handguard are fully compatible with standard mil-spec AR-15s, such as those from Anderson Manufacturing, Palmetto State Armory (PA-15), Daniel Defense, and others, provided a low-profile gas block is used.
No. The handguard is not designed to fit around an A2 front sight base (FSB). It would require significant modification, which is not recommended and would void your warranty.
Partially. The stock and grip will fit. However, the handguard is likely not compatible because these calibers often use larger gas blocks (.875" or .936"), which will not fit inside the handguard's 1.35" internal diameter.
Partially. The handguard and grip will fit. However, Bear Creek often uses commercial-spec buffer tubes, which are not compatible with the mil-spec Vigilante stock. The buffer tube would need to be swapped for a mil-spec version.
Yes. The CMMG Banshee uses a mil-spec barrel nut and blowback system, making it compatible. Since the shortest handguard is 9", you may want to use a linear compensator on the 8" barrel.
No. The handguard is designed for an AR-15 profile, while the CMMG Mutant requires a DPMS High profile handguard (similar to an AR-10). The Vigilante stock, grip, and M-LOK covers will work.
No. The Vigilante handguard is not compatible with the Foxtrot Mike Ranch rifle.
Yes. Geissele uppers use mil-spec threads and low-profile gas blocks, making them fully compatible with the Vigilante handguard.
No. These platforms have different dimensions and attachment points (piston systems) and are not compatible with the Vigilante stock, grip, or handguard.
Partially. The stock and grip are compatible. The handguard is not, as its internal diameter is too small for the gas block used by POF.
Yes. The PSA KS-47 uses a standard AR-15 handguard and should be compatible. We recommend confirming the specifications with PSA before purchasing.
Partially. The grip is compatible, but you must use the original VR80 grip screw. The stock is not directly compatible because the VR80 uses a commercial buffer tube. You must convert it to a mil-spec buffer tube to use the Vigilante stock.
It depends on the model. If your Ruger AR-556 has a standard low-profile gas block and M-LOK handguard, it is compatible. If it has the pinned A2 front sight gas block, the handguard will not fit without significant modification that voids the warran
Partially. While the SFAR can accept some AR-15 handguards, it will require minor modification to the WOOX handguard to accommodate the gas block. This modification would void the warranty.
Yes. The Sig Sauer M400 Tread is built to mil-spec standards and is fully compatible with all Vigilante furniture.
Partially. The Vigilante stock and grip will fit the Sig 716i. The handguard is not compatible as it is an AR-15 part. We recommend the M-LOK cover kit for this rifle.
Yes, with a condition. The M&P15 series is mil-spec and compatible. However, if your model has a railed gas block or an A2 front sight, you must replace it with a low-profile gas block for the handguard to fit.
Yes. Modern Tippmann M4-22 rifles use mil-spec components and are compatible with the full Vigilante furniture set. Note that older models may not be compatible.