Shotgun Furniture

Information about our shotgun furniture, technical & compatibility questions, installation guides and maintenance tips.

Articles

What is the Gladitore compatible with?

Compatible with your Mossberg 88/ 500 / 590 / 590A1 and Remingon 870 & Tac14 12 ga pump shotguns. The Gladiatore Stock is also compatible with all the shotguns that use:- Magpul SGA® Stock – Remington® 870- Magpul SGA® Stock – Mossberg® 500/590/590A1

How do I know which Gladiatore forend to buy for my Mossberg shotgun?

You must measure your action tube. Mossberg uses two different lengths, 6 3/4" and 7 3/4", across their product lines. You need to remove the factory forend and measure the metal tube to ensure you order the correct size. You can reference this image

What is the purpose of the plastic spacer/bushing included with the Mossberg 590 kits?

That spacer is necessary for installing the forend on Mossberg 590S and 590A1 models. It is installed after the forend, just before the action tube nut, to reduce any up-and-down play and ensure a secure fit.

My Mossberg with 7 3/4" slide has play with Gladiatore forend, is this normal?

In some models, typically the 590A1 and 590S, there is slight up-and-down play which will be resolved by adding the spacer included with the kit. To install it, simply add the bushing at the end after installing the forend, before replacing the actio

Is the Gladiatore forend compatible with a factory heat shield?

No. The forend will not clear a factory heat shield without being modified (sanded down), which will void your warranty. You can watch a step-by-step video on how to modify the forend here: https://www.youtube.com/watch?v=QeJ9sASlkJM&t=125s

Is the Gladiatore compatible with .410 gauge shotguns?

No. The Gladiatore furniture is not compatible with any .410 gauge shotguns from any manufacturer (including the Mossberg 500 .410). The receivers and components of .410 models are significantly smaller and do not match our designs. At this time, WOO

Does the WOOX Gladiatore stock have a QD sling attachment point?

Yes, the Gladiatore stock includes an integrated QD mount for sling attachment. The club grip, however, does not have a sling attachment point.

Can I put the Gladiatore stock on my Mossberg Shockwave?

Yes, but be aware of the law. While the stock is physically compatible, installing a buttstock on a firearm like the Shockwave (which was sold with a pistol-style grip) may legally reclassify it as a Short-Barreled Shotgun (SBS). An SBS is an NFA-reg

Is the Gladiatore compatible with the Mossberg 500 / 500a1?

Yes, the Gladiatore furniture is compatible. Remember to measure your action tube length (6 3/4" or 7 3/4") before ordering the forend. You can reference this image here: https://cdn.shopify.com/s/files/1/0065/5104/4181/files/Gladiatore_Compatibility

Will the Gladiatore fit my Mossberg 590 / 590A1 / 590 Tactical?

Yes, the kits are compatible. The 590A1 model typically requires the 7 3/4" forend and the included plastic bushing for a secure fit. Always measure your specific shotgun to be certain. You can reference this image here: https://cdn.shopify.com/s/fil

Is the WOOX Gladiatore stock and forend kit compatible with a new Mossberg 500 in 20 gauge?

Partially. While older Mossberg 500 shotguns shared the same action size for 12 and 20 gauge, newer 20-gauge models are built on a dedicated, smaller action and are not directly compatible with our Gladiatore series without modification. It's best to

Will the Gladiatore fit the Mossberg 590S (Shockwave or Compact)?

The forend and club grip (or bird head grip) are compatible, but the buttstock is NOT compatible with the 590S Shockwave model due to receiver design differences. You must measure the action tube length to select the correct forend. You can reference

Is the Gladiatore kit compatible with the Maverick 88?

Yes. The WOOX Gladiatore forend is compatible, but Maverick 88 shotguns come with a one-piece action bar/forend assembly. You will need to purchase a Mossberg 500 action slide tube assembly (either 6 3/4" or 7 3/4" length) to install our forend. Plea

Will the furniture fit a Mossberg 500 Flex?

Yes, the Gladiatore stock is compatible with the Mossberg 500 Flex. You can install it by removing the existing Flex stock system.

Is the Gladiatore compatible with the Mossberg 500 Super Bantam?

No. The Gladiatore stock and forend are not compatible with the Bantam or Super Bantam youth models.

Are there any plans for a Mossberg 940 Pro Tactical kit?

No. There are no current plans to produce a forend and stock for the Mossberg 940 Pro Tactical.

Is the Gladiatore compatible with a Remington 870?

Yes. The Gladiatore stock and forend are compatible with 12 gauge Remington 870 models, including older Wingmaster variants. There is only one size forend for the 870.

Will the Gladiatore fit a 20 gauge Remington 870?

No. We do not offer a version of the Gladiatore for the 20 gauge Remington 870.

Will the Gladiatore fit a 20 gauge 870 TAC-14?

No. We do not offer a version of the Gladiatore for the 20 gauge Remington 870. However, it appears that a standard 12ga forend can fit with a shim, as noted in this Reddit post: https://www.reddit.com/r/guns/comments/12sgglu/how_to_putting_a_remingt

Is the Gladiatore compatible with the Remington 870-DM (Detachable Magazine)?

Partially. The buttstock is compatible, but the forend may not have enough clearance to function properly with the detachable magazine system. This is not a guaranteed fit.

Will the WOOX forend fit a Remington TAC-14 12ga?

Yes. The TAC-14 is based on the 870 receiver, and the Remington 870 version of the Gladiatore forend and club grip is compatible.

Is the stock compatible with a Remington 7600?

Partially. The buttstock may fit the Remington 7600 with some modification, but the forend is not compatible.

Is there a kit for the Beretta 1301 or A300?

Not directly. We do not make a kit specifically for Beretta shotguns. However, some users have successfully mounted our Mossberg 500-pattern stock onto a Beretta 1301 using a third-party adapter from companies like GG&G. This is a custom modification

Will the Gladiatore fit a Citadel Mariner?

No. The Citadel uses a different stock bolt thread and has different forend dimensions. It is not compatible without custom modification that would void the warranty.

Is there a stock for the Winchester SXP Field model?

No. Our stocks are not compatible with the Winchester SXP.

Do you make furniture for the Sig Sauer MCX Regulator?

Yes, the Gladiatore stock is compatible. The SIG MCX Regulator uses Mossberg 500 mounting hardware, so our Gladiatore stock designed for the Mossberg will fit. We do not offer a compatible forend.

Do you make a stock for the Stoeger Longfowler?

No. There are no current plans to support Stoeger shotguns.

Will the Gladiatore fit a Tokarev TX3?

No. The Gladiatore set is not compatible with the Tokarev TX3.

Does WOOX make a stock for the Remington 1187 or other semi-auto shotguns?

No, WOOX does not currently offer stocks for the Remington 1187 or other semi-auto shotguns like the Benelli M4, Stoeger M3K, or Mossberg 940. Our shotgun furniture is designed for pump-action models.

Is the WOOX Gladiatore stock compatible with a Fightlite SCR?

No. The mounting hardware and grip angle of the Gladiatore stock interferes with the Fightlite SCR's "rat-tail" buffer system that extends into the stock.

Are WOOX stocks compatible with clones like the S&W Model 3000 (Rem 870 clone) or Tokarev TX3 (Mossberg 500 clone)?

While many clones are dimensionally similar, we have not tested them and cannot guarantee a perfect fit. Customers have reported success with buttstocks, but forends may require modification due to differences in trigger guards or tube diameters, whi