BDL refers to a hunting-style configuration with a Hinged Floorplate. Use this option to hold 2-3 rounds at the time. DBM stands for Detachable Box Magazine. Use this option if you need an AICS magazine holding 5+ rounds.
You can get the Hawkins Hinged Floorplate - Oberndorf BDL directly on their site.
You can buy them directly on our website!. Check them out here: https://wooxstore.com/collections/gunstock-accessories-bottom-metals/products/hawkins-m5-detachable-bottom-metal
The bottom metal action length should match your chassis length choice. For example: a Furiosa Remington 700 SA (Short Action) works with SA DBM Bottom Metal (Short Action chassis + Short Action bottom metal). For most Remington 700 LA (Long Action)
While the Furiousa Ultra can accommodate a Defiance XM length action, in some cases it may require additional inletting by a gunsmith. Since Defiance actions can have slight variations, some may fit without additional adjustments while others may not
The Seekins Havak PH2 is considered a Remington 700 clone, so you should not have any issues with compatibility.
The Remington 721 should fit into the Remington 700 Long Action stocks but will require a AICS pattern magazines and bottom metal and in most cases also requires modification to accommodate the size of the bolt handle.This would void our warranty and
Christensen Arms Bolt Actions are considered Remington 700 Clones, so it should fit any of our Remington 700. You will need to choose the correct action size for your caliber.
Yes. This is a Rem700 clone so you should not have issues with compatibility.
The 737R from Impact Precision is a clone that uses a recoil lug that is part of the action over the original 700 design where the barrel shim and the recoil lug are the same. In some designs this can cause fitment issues.Our stocks are designed to a
All of our Remington 700 and clone stocks would accommodate that barrel nut.All forends are cut to allow for up to a 1.17" barrel.
The Seekins Havak PH2 is considered a Remington 700 clone, so itwill fit into any of our stocks! You will need to choose the correct action length for your caliber.
Our Stocks are compatible with defiance actions as they are rem700 clones but if you have a custom length, it may not be compatible.
The Terminus action should work with any of stocks as it is a Rem700 clone. You will need to choose the correct action length for your caliber.
The Remington 721 should fit into the Remington 700 Long Action stocks but will require a AICS pattern magazines and bottom metal and in most cases also requires modification to accommodate the size of the bolt handle.This would void our warranty and
Based in the information and specs from Vudoo gunworks, you would need a Rem700 BDL and Hawkins Oberndorf Bottom metal.
Absolutely! Our gunstocks are meticulously designed to fit a wide range of Remington 700 configurations.Given that the Bergara B-14 shares the same design features as the Remington 700, our gunstocks are also compatible with the Bergara B-14 series.
Good afternoon! WOOX Stocks are compatible with Remington 700 models and clones, which means they should work well with your Bergara B14 Ridge Wilderness. The barrel channels of the can accommodate floating barrels up to 1.17 inches in diameter.
Yes - For the Bergara B-14 Ridge in .300 WinMag, you can use the factory hinged bottom metal by selecting the "Remington 700 & Clones - BDL LA" on any of our stocks.If your would like to change to a detachable box magazine, you would want to select t
The Bergara B-14R is considered a Remington 700 clone, so it should be just a straight exchange from your current stock to any of ours.
Yes! This is a Rem700 Clone so you will not have any compatibility issues.
This is a Rem700 Clone so you should not have any compatibility issues with any of our stocks.
When using Bergara B14 .22 caliber rifles with WOOX stocks that are designed for Remington 700 clones, it's important to note that you may require the Hawkins M5 bottom metal featuring the long magazine release. This specific bottom metal is essentia
Yes. The Aero Solus is a Remington 700 clone and is compatible with all our stocks offered for the Remington 700.
Yes. These are high-quality Remington 700 clone actions and are compatible with our "Remington 700 & Clones" chassis options.
Unfortunately we do not manufacture any stocks for the Remington 66.It was discontinued back in 1989, so your best options will be finding a used one for parts or having a gunsmith make one from scratch.
You may find additional compatibility by following the link below:. https://hawkinsprecision.com/2020/06/15/hawkins-precisions-guide-to-purchasing-precision-rifle-bottom-metal/