WOOX Knowledge Base logo
WOOX Knowledge Base logo

All articles

How do I care for my WOOX wood products?Updated 3 months ago

WALNUT GUNSTOCK MAINTENANCE | CLEANING

CONFIRM YOUR SHOTGUN IS UNLOADED PRIOR TO PROCEED.  GOOD?  CHECK AGAIN.

1. INITIAL DRY CLEAN 

  • Use a soft brush (like a paintbrush or toothbrush) to get into checkering or tight spots.
  • Wipe down with a microfiber or lint-free cloth to remove dust and dirt.

 

2. CLEANING

  • Dampen a cloth with lukewarm water and a drop of mild dish soap.
  • Wring it out thoroughly so it’s just damp—not wet.
  • Wipe carefully along the grain.
  • Avoid getting moisture into the action or pores of the wood.

Tip: Wrap the cloth around your finger to get into curves or checkered areas.

 

3. DRY IT IMMEDIATELY

  • Use a dry, clean cloth to remove any moisture.
  • Let the rifle sit at room temperature for a bit to fully air dry—don’t use heat or direct sunlight.

ALWAYS AVOID

  • Never use harsh chemicals or cleaners, undiluted detergents
  • Never soak the wood in water or other liquids.
  • Never use abrasive sponges or scrubbers for cleaning
Was this article helpful?
Yes
No