Do you make Stocks for Savage 110 long action top bolt release with aics style magazine?
Yes - All of our Savage 110 LA options will accommodate both top and bottom bolt release and will accept your AICS-L patterned bottom metal.
Yes - All of our Savage 110 LA options will accommodate both top and bottom bolt release and will accept your AICS-L patterned bottom metal.
Our Savage 110 Long Action will fit your Trail hunter 7mmPRC.There are some variations in the bottom metals, our stock is inlet for the Savage AICS bottom metal; So you may need to acquire a new bottom metal to accommodate.
Savage has made many changes to there pattern over the years so here is how to tell if ours will accommodate it!Our Savage 110 SA stocks require a single feed action not a stagger feed and must have a 4.4inch gap in the action screws.The short action
Savage has made a number of changes over the years, the best way to tell if your long actions will work is if they are single feed and have a 5.1inch spread between the action screws.Looking at the sub models that you have looks like nether of them h
Savage has had several changes over the years, our stocks are set up for their most recent models where the magazine are center fed, the older ones that are stager fed will not be compatible.If you have one that is center fed you may need a new trigg
If you have a center feed version of the Savage 110 Apex Hunter 279WSM, then all of our rifle stocks excluding the Furiosa Ultra and Titano will have compatible options.You will want to select the Savage 110 LA under Manufacture Model.
Yes! Any of our Savage 110 Long actions should accommodate these components.
The Savage 12 has the same action as the 10. Only difference between the two were the barrel width and the stock. As long as the barrel is 1.17" or less it should fit!
No, We are not compatible with the model at this time.
Savage 110 SA models require a 4.4-inch action bolt spread and are only compatible with center feed magazines.